| Customization: | Available |
|---|---|
| Application Fields: | New Energy |
| Certification: | CE, ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Working principle of pem electrolyzer :
Deionized water is supplied to the membrane electrode assembly, and oxygen, hydrogen ions and electrons are precipitated on the anode side. Electrons are transferred to the cathode through the circuit, and hydrogen ions in the form of hydration (h+·xh20) pass through the ion exchange membrane to the cathode; At the cathode, hydrogen ions recombine with electrons to form hydrogen, and some of the water is carried to the cathode.
Working principle of alkaline water hydrogen electrolyzer :
When the electrolyzer is running, the electrolyte enters the electrolyzer from the inlet on the lower side, and the water is electrolyzed into hydrogen and oxygen in each electrolytic cell. The mixture of hydrogen and electrolyte flows out from the outlet on the hydrogen side, and the mixture of oxygen and electrolyte flows out from the outlet on the oxygen side.
Working principle of alkaline water hydrogen production electrolyzer
Appearance structure diagram of alkaline water hydrogen production electrolyzer
1--End pressure plate 2--Insulation sleeve 3--Left plate 4--Sealing gasket 5--Middle plate
6--right plate 7--disc spring assembly 8--Big bolt 9--Big nut 10- Hydrogen side outlet
11--Oxygen side outlet 12--Electrolyte inlet 13--Terminal board
1). A solid electrolyte acts as an electrolyte for electrolyzing water without lye;
2). Hydrogen is of high purity, less maintenance, low cost of hydrogen production, no corrosive liquid, no pollution to the environment;
3). Low operating cost, hydrogen machine equipment integration, short installation cycle;
4). Field debugging is simple, and the hydrogen production equipment has been debugging before leaving the factory;
5). Hydrogen production 0-100% full range of adjustable, more convenient operation;
6). One key start, 5 minutes to produce qualified hydrogen, no manual duty, shutdown can stop hydrogen production, avoid the waste of resources;
7). More safe, equipment with national safety and explosion-proof certification;
8). More intelligent, equipment integration, system automatic identification protection;
9). More economical, higher investment, low operating costs, low life cost;
10). Smaller, covers an area of about 3m2, can be installed near the generator;
11). More worry, maintenance only need to replace the desiccant, without 5 years of overhaul.
| Product name | Electrolyzer Hydrogen Generator |
| Hydrogen production(m3/h) | 1-1000 |
| Hydrogen purity | 99.999% |
| Water requirements | Purified water,Deionized water |
| Pure water consumption | 1-1000 |
| Electrolysis temperature | ≤85 |
| Products can be also custom-made according to special requirements. | |
| Photovoltaic hydrogen energy storage power generation heat for villa | Containerized hydrogen electrolysis system |
| Hydrogen fuel cell vehicle on-site hydrogen production, hydrogen storage and hydrogenation station equipment hydrogen production,compression and filling | The hydrogen produced is used to fill bottles and tankers |
| Small hydrogen cell | Perfluorosulfonic acid membrane electrode |
| Hydrogen and oxygen fuel cells | Titanium fiber |
WOBO Group has been engaged in the low-temperature and air separation industries for decades. Operating Low-temperature Application Equipment, Gas Separation Equipment, Green New Energy Equipment and other products. Providing customers with the best products and solutions has always been our goal.
WOBO Group has carried out technical cooperation with a number of large hydroelectric hydrolysis hydrogen production companies, and jointly developed with domestic well-known universities, and established a comprehensive laboratory for production inspection and testing. WOBO hydrogen production equipment has been used in more than 30 countries around the world.
){kind=link}