State-of-The-Art DN25 RC Clo2 Generation System for Treatment of Sludge in Water Plants

• Customization: Available
• Application Fields: Chemical
• Certification: CE
• Condition: New
• Noise Level: Low
• Parts: Gas Tank
• Purpose: Gas Manufacturing
• Structure: Vertical
• Types: Air separation equipment
• Working principle: Electrolysis
• Model: Cdg-2000-Clo2
• Maximum Yield of Available Chlorine: 2000g / H
• Salt Consumption: 1.6g / G Cl2
• Power: <16kw
• Voltage: 380 AC V
• Water Intake: DN40
• Disinfectant Outlet: DN50
• Sewage Outlet: DN25
• Transport Package: Wooden Case
• Trademark: WOBO
• Origin: China
• HS Code: 8405100000
• Production Capacity: 50~10000 G / H

Product Description

High-Efficiency Chlorine Dioxide Generator, The First Choice for Pure Disinfection

State-Of-The-Art DN25 RC ClO2 Generation System for Treatment of Sludge In Water Plants

Product Description

 

The chlorine dioxide generator is manufactured using advanced reaction technology and high-quality materials. The main body is usually made of corrosion-resistant stainless steel materials to ensure the durability and stability of the equipment. The internal reaction system is carefully designed to efficiently generate chlorine dioxide gas. There are various sizes available for selection according to different usage scenarios. When in use, connect the generator to the water source or air treatment system, and precisely control the output of chlorine dioxide by adjusting parameters to achieve the purpose of disinfection.

Product Parameters

 

 

Model	Maximum yield of available chlorine	Salt consumption	Power	Voltage	Outer pipe diameter
	( g / h)	( g / g Cl2)	(Kw)	(AC V)	water intake	Disinfectant outlet	Sewage outlet
CDG-2000-ClO2	2000	1.6	<16	380	DN40	DN50	DN25
CDG-3000-ClO2	3000	1.6	<24	380	DN40	DN50	DN32
CDG-4000-ClO2	4000	1.6	<32	380	DN40	DN50	DN32
CDG-4500-ClO2	4500	1.6	<36	380	DN40	DN50	DN32
CDG-5000-ClO2	5000	1.6	<40	380	DN40	DN50	DN32
CDG-10000-ClO2	10000	1.6	<80	380	DN40	DN50	DN32

Technical Principle

Working Principle of Chlorine Dioxide Generator:

The sodium chlorate aqueous solution and the hydrochloric acid solution are fed into the reactor by the metering pump, and the reaction is fully carried out under a certain temperature and negative pressure, and the output is mainly chlorine dioxide, which is absorbed by the water ejector and mixed with water to form a disinfectant. After that, pass it into the disinfected water.  

Detailed Photos

 

• Optimal raw material concentrations: HCl at 31% and NaClO₃ at 27%, mixed in a 1:1 volume ratio.

• Only domestic system with a five-stage reactor, achieving a total raw material conversion rate of ≥90%, with a chlorine dioxide to chlorine mass ratio greater than 1.

• The reactor is made of titanium alloy, resistant to high temperatures, corrosion, and pressure.

• Infrared heating technology ensures rapid heating with low power consumption, significantly reducing energy usage compared to similar products.

• Direct temperature measurement inside the reactor, with the protective sheath for the sensor made of titanium alloy.

• The system uses dual temperature control, preheating the first four stages to 30-40°C and heating the fifth stage to 71°C.

• Triple protection in the temperature control system.

• A well-designed installation ensures no chlorine dioxide or corrosive gases indoors, along with zero noise and leakage pollution.

 

 

Product Application

• Disinfection of life, drinking and tap water on various occasions;
• Sterilization of restaurants, hotels, homes, tableware sanitary facilities, air environment disinfection, etc.
• Final sterilization and disinfection of equipment, pipes, and containers in food and beverage factories and fermentation industries.
• Sterilization of pipelines, facilities, and environment in dairy factories and slaughterhouses;
• Sterilization and disinfection of hospital sewage;
• Sterilization of swimming pool, industrial circulating water, and bathwater;
• Anti-mold treatment for disinfection, sterilization, and deodorization of the hospital, sanitation, and clinical equipment;
• Preservation and final washing and disinfection of foods such as homes, hotels, restaurants, fruits, vegetables, fish, and meat;
• Equipped with various oral disinfectants, deodorants, and wound cleaning solutions.
• Sterilization and deodorization in wastewater reuse;
• Bleaching agent for flour and various foods;
• Bleaching agents for papermaking, printing, and dyeing industries;
• Cyanide breaking treatment of electroplating wastewater containing cyanide, decolorization treatment of printing and dyeing wastewater, and algae removal and sterilization treatment of industrial cooling water.

Certifications